Principal Structural Engineer in ZH, The Hague, Нидерланды

Job Overview:
Detailed knowledge of design techniques and analysis methods, and detailed knowledge of the theory, content and application of standards, codes and guidelines as applicable for offshore. Knowledgeable in project coordination and execution skills. Has continued to develop working knowledge and application of offshore structural codes and standards.
Key Responsibilities/Accountabilities:
  • Perform conceptual, FEED, and detailed analyses and design as per design basis, project specifications, design codes and standards.
  • Apply in-depth skills and broad knowledge of the business to address complex problems and nonstandard  situations.
  • Prepare clear and accurate detailed design calculations and analyses including design reports and procedures.
  • Manage own time to meet objectives, and (as Lead Engineer) forecast and plan resource requirements.
  • Clearly communicate and explain difficult concepts and persuade others to adopt a point of view.
  • Perform detailed engineering and design calculations including analysis of offshore structures_in- service I pre-service conditions).
  • Direct small or medium Structural Engineering team as a Lead Engineer.
  • Lead the Discipline engineering design of the assigned work area and complete within planned schedule and budget, in accordance with standards, MDR and project-specific procedures and to a high professional standard.
  • Plan, organize and direct all aspects of Discipline execution on the assigned project including scope, deliverables, schedule and all manpower resources - agree allocations with the Discipline Manager.
  • Ensure interfaces and deliverables are clearly identified.
  • Maintain responsibility for progress and productivity, identifying any required corrective action.
  • Act as project representative for the Discipline during meetings with Project Team, Customer discipline lead and relevant agencies such as certifying authorities, auditors, third parties, etc.
  • Become fully familiar with the project scope of work, specifications, schedule and all inter-discipline requirements; including identifying concerns as early as practicable and taking appropriate initiatives to address the issues. Interpret contractual requirements as they relate to engineering execution.
  • Identify changes to scope and promptly raise change notifications, including providing any necessary supporting documentation and estimates. Provide similar support for Variation Orders.
  • Interface with all disciplines to develop clash free designs.
  • Interface with other departments to obtain input for Discipline designs and drawings .
  • Maintain close co-ordination with other engineering disciplines, Planning, Fabrication, Marine, and Project Management Team, as required.
  • Document substantive communications (communications that result in significant decisions or assignment of actions) and forward copies to Discipline Lead Engineer and Discipline Manager.
  • Prepare estimates for bid proposals, including technical query reviews, execution statements and manhour estimates, identifying software requirements  and any other project-specific  requirements.
  • Raise technical queries to obtain missing information, clarify work scope, and to maintain preferred McDermott procedures, specifications , standards, practices and operational requirements .
  • Prepare, review, and (as Lead Engineer) approve Discipline engineering design basis, philosophies, and technical specifications.
  • Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and functional integrity
  • Review project schedule and fabrication schedule in relation to construction sequence, milestones, and engineering scope.
  • Attend project kickoff and review meetings, vendor meetings, engineering meetings and offshore site surveys, as required.
  • Provide technical direction and review of Designers producing products related to Structural Engineering.
  • Prepare, review, and (as Lead Engineer) approve design reports and procedures.
  • Assist in providing necessary design inputs to other disciplines to enable them in proceeding with their deliverables.
  • Assist procurement personnel in procuring Discipline equipment, materials and services; ensuring that work produced complies with Customer objectives and procedures.   Procurement assistance includes preparing, reviewing, and (as Lead Engineer) approving requisitions, evaluating technical quotations and preparing queries, compiling bid tabulations and recommendations , preparing purchase requisitions, and coordinating with Procurement to expedite vendor documents, as directed by Discipline Lead Engineer.
  • Assist in updating weight report based on receipt of vendor information.
  • Review and (as Lead Engineer) approve vendor and subcontractor submittals, checking for compliance with project specifications and providing comments as necessary.
  • Review and (as Lead Engineer) approve design verification through single-discipline check I inter discipline check (IDC).
  • Provide technical support to fabrication queries, including identifying defect I rectification requirements.
  • Keep the Discipline Manager and Project Management Team apprised of all activities and concerns, technical, budgetary and manpower related.
  • Assist in providing inputs for actual, planning and forecasting progress reports including associated productivity.
  • Check final subcontractor and vendor data manuals to ensure that all requested data has been received and approved.
  • Present issues and problems to Customers in a timely manner and assist Lead Engineer in negotiating resolution in accordance with project and company requirements.
  • Perform (as required) Technical Quality Audit reviews in accordance with MDR Global Procedures.
  • Assist Lead Engineer with responses to Customer and other agencies (such as certifying authorities, auditors, third parties, etc.) on their review and approval.
  • Capture lessons learned and enter into MDR's Lessons Learned system.
  • Capture Knowledge Objects and enter into MDR's K.now system.
  • Guide less experienced engineers on MDR and Discipline procedures, standards, worksheets, design calculations, software, requisitions, technical bid evaluations, technical queries, etc.
  • Supervise and guide assigned engineers and coordinate with project Lead Designers for Discipline engineering and design deliverables.
  • Responsible for the engineering integrity of the assigned work area.
  • Monitor costs of own work processes.
  • Assist in the maintenance of departmental technical guidelines and standard calculation notes.
  • Participate in development and maintenance of Global Procedures, Software, and Standards .
  • May participate in standards development committees or task groups such as API.
  • Develop communication and presentation skills (e.g., write technical papers, participate in conferences and/or seminars, present design solutions, and/or present topics at 'lunch and learns'; etc.).
  • Identify and provide training to staff in specific techniques and proprietary software.
  • Provide information on employee performance to the Discipline Manager.
  • Assist Discipline manager in interviewing job applicants.
  • Provide guidance on preparing structural general arrangements, basic schemes for fabrication and installation.
  • Prepare I review design analyses, calculations and procedures for discipline deliverables such as:
    • Analyze structures for in-service conditions such as static, fatigue, earthquake, etc.
    • Analyze structures for pre-service conditions such as lift analyses, loadout analyses, and transportation and tiedown analyses.
    • Perform detailed steelwork design.
    • Review and (as Lead Engineer) approve all detailed drawings ensuring technical correctness professional presentation and that fabrication and installation requirements are satisfied)
    • Prepare Weight and Center of Gravity reports.
    • Review and (as Lead Engineer) approve the project Weight Control Report, ensuring technical quality, professional presentation and that Fabrication and installation requirements are employed.
    • Able to use standard SACS analysis software to perform higher level analysis of offshore platforms, providing guidance for less-experienced engineers performing these analyses.
  • Act as project-based Discipline point of contact in communications and meetings with Customer counterparts.
  • Ensure substantive communications are documented.
  • Prepare bid's and project's Discipline engineering budget and execution plans, updating as required.
  • Identify project staff needs based on knowledge of individual engineer's skill sets and provide requests to the Discipline manager.
  • Plan, organize and assign tasks, responsibilities, and manhour budgets to the discipline team, and verify tasks are completed within budgets.
  • Plan Discipline Level 4 detail deliverable schedule/ register compliant with the overall execution plan.
  • Prepare working forecasts identifying change management plans, corrective action and real time schedule.
  • Provide Discipline inputs for actual, planning and forecasting progress reports including associated productivity.
  • Alert project team of any deviation from the scope or a need for change order.
  • Monitor KPI measurement results, and take corrective action as necessary to improve Discipline performance, including performance at interfaces with others
  • Coordinate with other Discipline Lead Engineers and Designers to ensure timely receipt of necessary design inputs.
  • Review and approve requisitions, technical quotation evaluations and queries, compiled bid tabulations and recommendations, and purchase requisitions; and coordinate with Procurement to expedite vendor documents as required.
  • Lead the Discipline team during project audits (internal, Customer and third party technical audits) and Design Reviews.
  • Review comments from Customers & other agencies on documents and drawings produced by the team and resolve and give guidance on their update and incorporation.
  • Assist Discipline manager in the preparation of quarterly forecasts and manpower planning.
  • Anticipate project engineering needs and plan accordingly.
  • Coordinate with vendor for discipline managed/procured items
  • Assist Discipline manager and Project Engineering Manager or Project Manager in Performance Evaluation of project team members.
Basic Qualifications:
  • 15 yrs in oil and gas with major contractor or consultant predominantly performing detail design of offshore facilities.
  • Bachelor Degree in Civil or Structural Engineering (Master Degree is Preferred).
  • Preferably Registered Professional Engineer or member of professional engineering society.
Company Overview:
McDermott is a premier, fully integrated provider of technology, engineering and construction solutions to the energy industry. For more than a century, customers have trusted McDermott to design and build end-to-end infrastructure and technology solutionsfrom the wellhead to the storage tankto transport and transform oil and gas into the products the world needs today.

JOB SEARCH

Keywords / job title / skill / company

Type any location in the box above, or select below :
Africa
Asia & Pacific
CIS
Europe
Middle East
North America
South America
Afghanistan
Åland Islands
Albania
Algeria
American Samoa
Andorra
Angola
Anguilla
Antarctica
Antigua and Barbuda
Argentina
Armenia
Aruba
Australia
Austria
Azerbaijan
Bahamas, The
Bahrain
Bangladesh
Barbados
Belarus
Belgium
Belize
Benin
Bermuda
Bhutan
Bolivia
Bonaire, Sint Eustatius and Saba
Bosnia and Herzegovina
Botswana
Bouvet Island
Brazil
British Indian Ocean Territory
British Virgin Islands
Brunei
Bulgaria
Burkina Faso
Burundi
Cambodia
Cameroon
Canada
Cape Verde
Cayman Islands
Central African Republic
Chad
Chile
China
Christmas Island
Cocos (Keeling) Islands
Colombia
Comoros
Congo, Democratic Republic of the
Congo, Republic of the
Cook Islands
Costa Rica
Cote d'Ivoire
Croatia
Curaçao
Cyprus
Czech Republic
Denmark
Djibouti
Dominica
Dominican Republic
East Timor
Ecuador
Egypt
El Salvador
Equatorial Guinea
Eritrea
Estonia
Ethiopia
Falkland Islands (Islas Malvinas)
Faroe Islands
Fiji
Finland
France
French Guiana
French Polynesia
French Southern and Antarctic Lands
Gabon
Gambia, The
Georgia
Germany
Ghana
Gibraltar
Greece
Greenland
Grenada
Guadeloupe
Guam
Guatemala
Guernsey
Guinea
Guinea-Bissau
Guyana
Haiti
Heard Island and McDonald Islands
Holy See (Vatican City)
Honduras
Hong Kong
Hungary
Iceland
India
Indonesia
Iraq
Ireland
Isle of Man
Israel
Italy
Jamaica
Japan
Jersey
Jordan
Kazakhstan
Kenya
Kiribati
Korea, South
Kosovo
Kuwait
Kyrgyzstan
Laos
Latvia
Lebanon
Lesotho
Liberia
Libyan Arab
Liechtenstein
Lithuania
Luxembourg
Macau
Madagascar
Malawi
Malaysia
Maldives
Mali
Malta
Marshall Islands
Martinique
Mauritania
Mauritius
Mayotte
Mexico
Micronesia, Federated States of
Moldova, Republic of
Monaco
Mongolia
Montenegro
Montserrat
Morocco
Mozambique
Myanmar
Namibia
Nauru
Nepal
Netherlands
Netherlands Antilles
New Caledonia
New Zealand
Nicaragua
Niger
Nigeria
Niue
Norfolk Island
Northern Mariana Islands
Norway
Oman
Pakistan
Palau
Palestinian territories
Panama
Papua New Guinea
Paraguay
Peru
Philippines
Pitcairn Islands
Poland
Portugal
Puerto Rico
Qatar
Reunion
Romania
Russia
Rwanda
Saint Barthélemy
Saint Helena
Saint Kitts and Nevis
Saint Lucia
Saint Martin
Saint Pierre and Miquelon
Saint Vincent and the Grenadines
Samoa
San Marino
Sao Tome and Principe
Saudi Arabia
Senegal
Serbia
Seychelles
Sierra Leone
Singapore
Sint Maarten
Slovakia
Slovenia
Solomon Islands
Somalia
South Africa
South Georgia and the Islands
South Sudan
Spain
Sri Lanka
Suriname
Svalbard
Swaziland
Sweden
Switzerland
Taiwan
Tajikistan
Tanzania, United Republic of
Thailand
The Former Yugoslav Republic of Macedonia
Togo
Tokelau
Tonga
Trinidad and Tobago
Tunisia
Turkey
Turkmenistan
Turks and Caicos Islands
Tuvalu
Uganda
United Arab Emirates
United Kingdom
United States
United States Minor Outlying Islands
Uruguay
Uzbekistan
Vanuatu
Venezuela
Vietnam
Virgin Islands (US)
Wallis and Futuna
Western Sahara
Yemen
Zambia
Zimbabwe

Country, town, city or postcode

--Web2New--